Pattern TE-D

The briefing room with a shared display

The bridge for an external client is a deliberate compromise, decided in advance and written down.

Area
TEMPEST/RÖS
Environments
2
Products used
14

How it is built

The shared surface is the only common component — and therefore the only channel between the domains.DomainsBriefing roomDomain 1Domain 2External clientCodec switchPresentation surfacea deliberatecompromise
The shared surface is the only common component — and therefore the only channel between the domains.DomainsBriefing roomDomain 1Domain 2External clientCodec switchPresentation surfacea deliberate compromise
The shared surface is the only common component — and therefore the only channel between the domains.

How it works

Several domains reach one presentation surface through a sealed switch. Only one is connected at a time, and the others are physically disconnected rather than disabled.

The external client is the hole

A visitor with a laptop is the case every briefing room eventually meets. Bridging them to the shared surface is a deliberate architectural compromise — it should be decided in advance, written down, and given a procedure, not improvised five minutes before the meeting.

Nobody owns the room

A briefing room has a facilities owner and no security owner, which is why it drifts. The changeover checklist and the seal register are what keep the design from decaying between meetings.

In the catalogue

Equipment from the catalogue

TEMPEST Level A · RÖS U1

Codec Switch

Certified for both TEMPEST Level A and RÖS U1 for protection against intercepting signals and is designed to…

Product no 60-00-7829

TEMPEST Level A · RÖS U1

Codec Switch 1:4

Certified for TEMPEST Level A and RÖS U1 for protection against compromising emissions. It is intended to be…

Product no 60-00-9032

Standard

Ceiling Mount Projector V7 220–260 mm

Projector ceiling mount including shaft 220-260 mm for Fibersystem’s Projector V7 TEMPEST Level A+ & RÖS U1.

Product no 60-00-9211 (V7)

TEMPEST Level A · RÖS U1

Projector V7

Brightness
6500 Lumen
Format
16:10/16:9/4:3
Zoom / focus
Manual

Product no 60-00-8845

TEMPEST Level A · RÖS U1

Monitor 55" Touch

Screen size
55”
Optimal (recommended) resolution
3840 x 2160 @ 60 Hz
Display area
1210 x 680 (WxH) mm

Product no 60-00-7729

TEMPEST Level A · RÖS U1

Monitor 55" Level A

Screen size
55”
Optimal (recommended) resolution
3840 x 2160 @ 60 Hz
Display area
1210 x 680 (WxH) mm

Product no 60-00-7728

TEMPEST Level A · RÖS U1

Document Camera Level A

Connection
IEC 320-C14
Power consumption, typical
12 W
Dimensions
625 x 430 x 435 (HxWxD) mm

Product no 60-00-7776

TEMPEST Level A · RÖS U1

VTC Codec

Based on Cisco Codec EQ mounted in a RÖS U1 and TEMPEST Level A protected enclosure that connects to VTC 55"…

Product no 60-00-7507

TEMPEST Level A · RÖS U1

VTC Audio Unit

Intended to be a part of a RÖS U1 and TEMPEST Level A-approved videoconferencing system and allows for the…

Product no 60-00-7634

TEMPEST Level A · RÖS U1

VTC Headphones

TEMPEST Level A / RÖS U1 certified headphones for interception-proof audio in Fibersystem VTC systems.

Product no 60-00-7589

Standard

Secure Key Switch

Control of VTC Codec Switches in VTC Systems.

Product no 60-00-7996

TEMPEST Level B · RÖS U2

HDMI Diode

The Fibersystem HDMI Diode protects sensitive systems by ensuring that video and audio can only travel in one…

Product no 60-00-9155

Hands soldering a circuit board under a work lamp

Next step

Designing something that is not here?

Send us the constraints. We build from idea to certified end product, and most of what is in the catalogue started that way.

Verified credentials

All certifications