
Standard
Fiber Optical Converter IEEE C37.94 MM/SM
- Typical distance
- 2 km
- Wavelength
- 1310/1550 nm
- Fiber optic connector
- LC
3 configurations
Extenders

Fiber optical extender for link distances of 80–120 km, 200 km or 250 km. The Fibersystem 21-223 SM/SM Extender (converter) is intended to extend optical reach for low speed data signal into long haul distances. With a 21-223, short-reach optical signals can be sent without the additional, expensive communication systems normally used for long haul communications. Combined with the other products in Fibersystem’s teleprotection communication product line, the converter keeps the cost of the link down. The 21-223 is particularly useful in differential line protection setups where dedicated fiber is available, since no multiplexers are needed for the teleprotection traffic.
| Configuration | Product no | Certification |
|---|---|---|
| Fiber Optical Extender 80–120 km | 60-00-7251 (21-223) | Standard |
| Fiber Optical Extender 200 km | 60-00-6682 (21-223) | Standard |
| Fiber Optical Extender 250 km | 60-00-7252 (21-223) | Standard |
In the catalogue

Fiber Optical Extender 80–120 km
Fiber Optical Extender 200 km
Fiber Optical Extender 250 km
| Wavelength | 1550 nm |
|---|---|
| Fiber optic connector | LC |
| Optical system budget | 30 dB in single mode fiber 9/125 μm |
| DC | 48 VDC to 250 VDC, ±20 % |
|---|---|
| AC | 110 VAC to 230 VAC ±20 %, 50−60 Hz |
| AC/DC connector | IEC 320, 3 pin |
| Power consumption | <15 W |
Specifications taken from the product datasheet. The datasheet is the binding document. Ask us if anything is unclear for your installation.
| Wavelength | 1550 nm |
|---|---|
| Fiber optic connector | LC |
| Optical system budget | 46 dB in single mode fiber 9/125 μm |
| DC | 48 VDC to 250 VDC, ±20 % |
|---|---|
| AC | 110 VAC to 230 VAC ±20 %, 50−60 Hz |
| AC/DC connector | IEC 320, 3 pin |
| Power consumption | <15 W |
Specifications taken from the product datasheet. The datasheet is the binding document. Ask us if anything is unclear for your installation.
| Wavelength | 1550 nm |
|---|---|
| Fiber optic connector | LC |
| Optical system budget | 50 dB in single mode fiber 9/125 μm |
| DC | 48 VDC to 250 VDC, ±20 % |
|---|---|
| AC | 110 VAC to 230 VAC ±20 %, 50−60 Hz |
| AC/DC connector | IEC 320, 3 pin |
| Power consumption | <15 W |
Specifications taken from the product datasheet. The datasheet is the binding document. Ask us if anything is unclear for your installation.
In the catalogue

Standard
3 configurations

Standard
Product no 60-00-7248


Standard
Product no 60-00-9166 (21-219v2)

Next step
Request a quote for this product. Certification papers and procurement documentation are available on request. Our engineers in Stockholm respond directly.
Verified credentials
All certifications



