Converters

Fiber Optical Converter IEEE C37.94 MM/SM

Typical distance
2 km
Wavelength
1310/1550 nm
Fiber optic connector
LC
Standard

21-203 is a protocol independent optical-electrical-optical long haul converter link with data integrity control for high reliability. The incoming multimode signal is sampled and packaged in 4B/5B code before transmission on the singlemode interface. Incoming singlemode signal is decoded and error detected before reassembled and transmitted out the multimode interface. This conversion method offers a better (lower) error rate for low speed signals compared to transparent converters suitable only for high speed signals.

Configurations

ConfigurationProduct noCertification
Fiber Optical Converter IEEE C37.94 MM/SM60-00-5593 (21-203)Standard
Fiber Optical Converter IEEE C37.94 MM/SM Medium Range60-00-7171Standard
Fiber Optical Converter IEEE C37.94 MM/SM Long Range60-00-7250Standard

In the catalogue

Specifications

Fiber Optical Converter IEEE C37.94 MM/SM

Fiber optic link, multimode

Fiber Optical Converter IEEE C37.94 MM/SM – Fiber optic link, multimode
Wavelength850 nm
Fiber optic connectorLC
Optical system budget15 dB in multimode fiber 62.5/125 μm
Typical distance2 km

Fiber optic link, singlemode

Fiber Optical Converter IEEE C37.94 MM/SM – Fiber optic link, singlemode
Wavelength1310/1550 nm.
Fiber optic connectorLC
Optical system budget30 dB in single mode fiber 9/125 μm

Power supply

Fiber Optical Converter IEEE C37.94 MM/SM – Power supply
DC48 VDC to 250 VDC, ±20 %
AC110 VAC to 230 VAC ±20 %, 50−60 Hz
AC/DC connectorIEC 320, 3 pin.
Power consumption<15 W

Specifications taken from the product datasheet. The datasheet is the binding document. Ask us if anything is unclear for your installation.

About the product

  • Standards compliant for power substation installation
  • Protocol independent up to 2Mbit/s MM 850nm (IEEE C37.94) (C3794)
  • Power budget 30dB in SM 1550nm
  • Single supply range from 48VDC to 250VDC or 110VAC to 230VAC
  • 19” mounting with only 200mm depth
  • Range typical up to 120km

In the catalogue

Related products

Browse the full range

Standard

Fiber Optical Converter G.703 Codir – IEEE C37.94

The 21-216 Fiber Optic G.703 Codirectional – IEEE C37.94 Converter is an electro-optical interface converter…

Product no 60-00-7164 (21-216)

Standard

Fiber Optical Extender

Wavelength
1550 nm
Fiber optic connector
LC

3 configurations

Hands soldering a circuit board under a work lamp

Next step

Ready for a concrete proposal?

Request a quote for this product. Certification papers and procurement documentation are available on request. Our engineers in Stockholm respond directly.

Verified credentials

All certifications