Converters

Fiber Optical Converter G.703 Codir – IEEE C37.94

Standard

The 21-216 Fiber Optic G.703 Codirectional – IEEE C37.94 Converter is an electro-optical interface converter between G.703 Codir. 64 kbps (balanced) and IEEE C37.94 N×64 kbps optical interfaces. It extends balanced G.703 connections up to 2 km, free of interference and without signal degradation, at low cost. The unit supports all IEEE C37.94 channel configurations and is easy to set up. The 21-216 is designed to connect teleprotection equipment to telecom multiplexers in substations. It can also interconnect protection devices directly when one or both lack optical interfaces, so that equipment using IEEE C37.94 can work with devices that only support G.703.

In the catalogue

Specifications

Fiber Optical Converter G.703 Codir – IEEE C37.94

Fiber optic link

Fiber Optical Converter G.703 Codir – IEEE C37.94 – Fiber optic link
Data rate2048 kbps
ProtocolIEEE C37.94
FiberMultimode 50/125 μm or 62.5/125 μm, ST-connector
Optical system budget13 dB in 62.5/125 μm. 9 dB in 50/125 μm fiber
Typical distance0-2 km (3 dB system margin for 50/125 μm and 6 dB for 62.5/125 μm)

Galvanic link

Fiber Optical Converter G.703 Codir – IEEE C37.94 – Galvanic link
Data rate64 kbps
ProtocolG.703, Codir
ConnectorRJ45, S/FTP cable

Power supply

Fiber Optical Converter G.703 Codir – IEEE C37.94 – Power supply
DC48 VDC to 250 VDC, ±20%
AC230 VAC ±20%, 50−60 Ηz
AC connectorIEC 320, 3 pin

Environment

Fiber Optical Converter G.703 Codir – IEEE C37.94 – Environment
Operating temperature-25 to +55 oC
Storage temperature-40 to +85 oC
Relative humidity, operating5 to 95 %RH
Relative humidity, storage5–95 % RH, non-condensing

CE compliance

Fiber Optical Converter G.703 Codir – IEEE C37.94 – CE compliance
ImmunityEN 61000-6-2
EmissionEN 61000-6-4
LVDEN 50178; RIV = 250 V OVC = III

Mechanical compliance

Fiber Optical Converter G.703 Codir – IEEE C37.94 – Mechanical compliance
VibrationIEC 60255-21-1 Class 2
ShockIEC 60255-21-2 Class 2
SeismicIEC 60255-21-3 Class 2

EMC compliance

Fiber Optical Converter G.703 Codir – IEEE C37.94 – EMC compliance
ESDIEC 60255-22-2 Class 3, contact 6 kV, air 8 kV
RadiatedIEC 60255-22-3 / IEEE/ANSI C37.90.2; 35 V/m
Burst, powerIEC 60255-22-1 Class III
Burst, communicationIEC 60255-22-1 Class II; 0.5 kV diff; 1 kV common mode
Fast transient, powerIEC 60255-22-4 Class IV
Fast transient, communicationIEC 60255-22-4 Class II; 1 kV

Insulation

Fiber Optical Converter G.703 Codir – IEEE C37.94 – Insulation
Dielectric testIEC 60255-5, 2.0 kV 1 min
Impulse voltage testIEC 60255 / EN 50178 5 kV / 6 kV
Insulation resistanceIEC 60255-5; >100 Mohm at 500 VDC

Specifications taken from the product datasheet. The datasheet is the binding document. Ask us if anything is unclear for your installation.

Applications

What it is used for

Applications →
  1. Protect industrial & OT networksAttacks on critical infrastructure are daily operations, often state-sponsored.

In the catalogue

Related products

Browse the full range

Standard

Fiber Optical Extender

Wavelength
1550 nm
Fiber optic connector
LC

3 configurations

Hands soldering a circuit board under a work lamp

Next step

Ready for a concrete proposal?

Request a quote for this product. Certification papers and procurement documentation are available on request. Our engineers in Stockholm respond directly.

Verified credentials

All certifications