Data Diodes

Data Diode Rugged

Rugged / MIL-STD

Rugged

Fibersystem’s Data Diode Rugged is a secure, hardware-based one-way (simplex) connection between two networks for harsh field environments, so data cannot flow in the reverse direction. It comes in 1 Gbit or 100 Mbit, for multimode or singlemode fiber, with or without TEMPEST Level A and RÖS U1 approval. The fiber-optic design gives full galvanic separation, and one-way compatible protocols such as UDP stream, broadcast, Syslog, NTP and SNMP traps need no additional software.

Configurations

ConfigurationProduct noCertification
Data Diode Rugged 1 Gbit MM60-00-7132Rugged / MIL-STD
Data Diode Rugged 1 Gbit MM TEMPEST60-00-7131TEMPEST Level A / RÖS U1 · Rugged / MIL-STD
Data Diode Rugged 1 Gbit SM60-00-7444Rugged / MIL-STD
Data Diode Rugged 1 Gbit SM TEMPEST60-00-7445TEMPEST Level A / RÖS U1 · Rugged / MIL-STD
Data Diode Rugged 100 Mbit MM60-00-7133Rugged / MIL-STD
Data Diode Rugged 100 Mbit MM TEMPEST60-00-7134TEMPEST Level A / RÖS U1 · Rugged / MIL-STD

In the catalogue

Specifications

Data Diode Rugged 1 Gbit MM

Fiber optic link

Data Diode Rugged 1 Gbit MM – Fiber optic link
Data rate1 Gbps
Wavelength850 nm, optional 1310 nm
FiberMultimode 50/125 μm or 62.5/125 μm
Fiber optic connectorLC
Optical system budget13 dB in 62.5/125 μm, 9 dB in 50/125 μm
Typical distance0–2 km

About the product

The Rugged versions are available in 100 Mbps or 1 Gbps. Each is also available as a separate TEMPEST Level A and RÖS U1 approved configuration with its own product number. More variants are available in the Data Diodes 50-800 System series.

Features

  • Ruggedized for extremely harsh environments
  • One-way connection between two networks (also known as Simplex)
  • Hardware-based with no extra software, which eliminates the risk of data flowing in the wrong direction
  • Fiber optic links for galvanic separation between networks
  • Data will be transparently forwarded
  • No extra software needed when using one-way compatible protocols, such as: UDP stream/broadcast, Syslog, NTP, SNMP traps

Rugged features

  • Low pressure Designed to operate in low pressure according to MIL-STD 810G test method 500.5 Procedure-I type B airtransport storage and for operation procedure –II type a)
  • High temperature Designed to operate in high temperature according to MIL-STD 810G test method 501.5 Procedure -I (operation) level Hot dry +70°C and procedure-III (storage) Hot/dry (+71°C)
  • Low temperature Designed to operate in low temperature according to MIL-STD 810G test method 502.5 Procedure -I (Storage) Cold (C2)-46°C and procedure -II(operation) Cold (C2)-40°C
  • Rain Designed to operate in Rain according to MIL-STD 810G test method 506.5 Rain 506.4-I Outdoor, -II indoor with drop
  • Humidity Designed to operate in Humidity according to MIL-STD 810G test method 507.4 procedure -I High RH (B2) 6 cycles
  • Salt fog Designed to operate in Salt fog according to MIL-STD810G test method 509.5 with 5% concentration for 7 days
  • Vibrations Designed to operate in Vibrations according to MIL-STD 810G test method 514.5 procedure-I and -II Operation category 14 and 20; transport category 4,5 and 10. (Shock 40g@11ms, Chock 75g@6ms)
  • Shock Designed to operate in Shock according to MIL-STD 810G method 516.6 procedure -I (functional test for ground equipment) 3 shocks in each 6 directions
  • Water protected Designed to be Water protected according to IPX5
  • Dust protected Designed to be Dust protected according to IP4X
  • EMC protected Designed to be EMC protected according to MIL-STD 461F method; RE102 level Navy Mobile & Army and CE102 level Basic curve
  • EMI protected Designed to be EMI protected according to MIL-STD 461F method: RS103 level Army; CS101 level Curve#1; CS114 level Army; CS115 level Army and CS116 level Army

Environmental

  • Temperature range -40 to + 70°C

Power supply

  • DC 10-32VDC, Max 10W. (Optional 18-75VDC)
  • DC-connector 3 pin

Power consumption

  • 2,5W

Regulatory compliance

  • Safety: CE
  • Environmental: Complies with appropriate requirements of RoHs and WEEE

MIL standard

  • MIL-STD 810G

Dimensions and weight

  • 44 (H), 110(W), 227(D)mm/ 1.7(H), 4.3(W), 8.9(D)inch 1 HU high and ¼ 19inch wide
  • 1.4kg/ 3.09lbs

Applications

What it is used for

Applications →
  1. One-way data transferAny connection that can carry data in can carry an attack in.
  2. Protect industrial & OT networksAttacks on critical infrastructure are daily operations, often state-sponsored.

In the catalogue

Related products

Browse the full range

TEMPEST Level A · RÖS U1Standard

Data Diode Secure

Hardware-based one-way communication card module (Simplex) that completely eliminates the risk of data…

4 configurations

Standard

Data Diode Stand-Alone

Stand-alone unit for hardware-based one-way (simplex) communication that eliminates the risk of data leakage…

2 configurations

Hands soldering a circuit board under a work lamp

Next step

Ready for a concrete proposal?

Request a quote for this product. Certification papers and procurement documentation are available on request. Our engineers in Stockholm respond directly.

Verified credentials

All certifications