Open-mesh parabolic antenna against a cloudy sky

Application areas

One-way data transfer

Move data out of a protected network with a physical guarantee that nothing can travel back in. Data diodes from rugged field units to 19-inch rack systems.

Products used
6
Examples
3

Any connection that can carry data in can carry an attack in. Logs, measurements and reports often need to leave a protected network, and nothing may travel back the other way.

The application

A data diode enforces one-way flow physically: the sending side has only a transmitter, the receiving side only a receiver. There is nothing to configure and nothing for an attacker to exploit. Fibersystem builds data diodes at speeds from 100 Mbit to 1 Gbit as stand-alone units, 19-inch rack modules, rugged field units and HDMI variants. Middleware adds protocol support, and secure data taps are available for monitoring.

Typical deployments: log export from classified networks, one-way publishing between security domains, tamper-proof collection from industrial control systems.

Where it is used

Replacing an air gap

Mapping the flows comes before choosing the product, because the air gap is upheld by manual work that is rarely counted as a cost.

An air gap is not free. It is upheld with USB sticks, manual re-keying and exceptions, and it erodes quietly. The diode gives an auditable, logged and sized path where there used to be an unregulated one.

Here the decision is organisational rather than technical. You exchange an absolute but eroded guarantee for a narrower but real one. That is a good trade when the proposal says so plainly. When it does not, the proposal gets rejected, and for the right reasons.

Log export to a SOC

The one flow where the diode is cheaper and simpler than the alternative, which is why it is almost always the right first installation.

The log receiver is an attractive target and normally has network routes to everything it collects from. With the diode, a compromised SOC is no way back into the monitored systems, and the logs cannot be deleted from behind.

The diode is cheaper and simpler than the alternative here: no middleware is needed, the protocol is already one-way, and the chain of custody gets stronger as a side effect.

Backup of a protected network

Backup is the only flow where the volume is large, completeness is absolute and the time window is set by someone else.

A backup environment is by definition a complete copy of everything valuable, and it is reachable from production. Ransomware travels along exactly that path. The attacker encrypts production and backup in one operation, because the backup server holds accounts, agents and network routes into everything. The diode puts the newest copy somewhere the production domain physically cannot reach back to.

Backup is the only flow in this catalogue where the volume is large, completeness is absolute and the time window is set by somebody else. A dropped syslog message is an inconvenience. A truncated backup is discovered at the restore, six months later.

How it is built

Log export and evidence retention

Syslog passes natively without middleware, and the chain of custody gets stronger as a side effect.

Logs leave the monitored network. A compromised SOC is not a way back in.Monitored networkSOCSystem logsSyslog collectorSIEMEvidence archive, WORMdiode, syslogpasses nativelylogs cannot bedeleted from behind
Logs leave the monitored network. A compromised SOC is not a way back in.Monitored networkSOCSystem logsSyslog collectorSIEMEvidence archive,WORMdiode, syslog passesnativelylogs cannot bedeleted frombehind
  • One-way path
  • Data path
  • Path that does not exist
Logs leave the monitored network. A compromised SOC is not a way back in.

Recommended products

Products for this application

Browse the full range

TEMPEST Level A · RÖS U1Rugged

Data Diode Rugged

Secure, hardware-based one-way (simplex) connection between two networks for harsh field environments, so…

6 configurations

TEMPEST Level A · RÖS U1Standard

Data Diode Secure

Hardware-based one-way communication card module (Simplex) that completely eliminates the risk of data…

4 configurations

Standard

Data Diode Stand-Alone

Stand-alone unit for hardware-based one-way (simplex) communication that eliminates the risk of data leakage…

2 configurations

TEMPEST Level B · RÖS U2

HDMI Diode

Connector
DC plug
Power consumption, typical
4W
Dimensions
25.5 x 92 x 64 (HxWxD) mm

Product no 60-00-9155

TEMPEST Level A · RÖS U1

Secure Data Tap 1 Gbit

Fibersystem Secure Data TAP duplicates network signals, including any existing physical errors, to…

Product no 60-00-7450

Standard

Data Diode Middleware (DDMW)

Software solution for transferring data over data diodes in a controlled manner. It consists of a sender node…

Product no 60-00-7367

Hands soldering a circuit board under a work lamp

Next step

Application not on the list?

If the environment you need to secure looks different, our custom development takes it from idea to certified end product.

Verified credentials

All certifications