Fiber Optic Switches

Fiber Optical Switch WebGUI

Standard

Fiber Optical Switch WebGUI is an optical switch for high-bandwidth IP networks, with 2, 6 or 32 channels. The signal path is purely optical, with no optical-to-electrical conversion, so the switch is protocol independent and transparent to any data speed. It can be operated manually or remotely via the Web GUI, with API-based switching commands and management through command and TTL-level interfaces with HTTPS/SSL support. Typical applications are optical protection, test systems, remote reconfigurable add-drop multiplexers, FTTH and dark-fiber provisioning, disaster recovery, and rerouting and restoration of communication, in both standard and mission-critical environments.

Configurations

ConfigurationProduct noCertification
Fiber Optical Switch 1x2 MM WebGUI60-00-7574Standard
Fiber Optical Switch 1x6 WebGUI60-00-7334Standard
Fiber Optical Switch 1x32 MM WebGUI60-00-7338Standard

In the catalogue

Specifications

Fiber Optical Switch 1x2 MM WebGUI

Connections

Fiber Optical Switch 1x2 MM WebGUI – Connections
OpticalMultimode 125 μm, wavelength independent
Optical channels in/out2 x LC Duplex
Optical channels in/out2 x LC Duplex + 2 x LC Duplex
Insertion loss, typical<0.3 dB
Crosstalk-80 dB
Repeatability±0.1 dB
Switching time3.5 ms
Durability30.000.000 cycles

Power supply

Fiber Optical Switch 1x2 MM WebGUI – Power supply
Power connectorIEC60320
Power supply100-240 VAC 50/60 Hz or 48-250 VDC ±20 %
Power consumption, maximum25 W
Redundant power supplyOptional

Mechanics and environment

Fiber Optical Switch 1x2 MM WebGUI – Mechanics and environment
Cabinet dimensions (H×W×D)45 x 483 x 173 mm
Weight3 kg
Operating temperature0 to 70 °C
Relative humidity10-80 %RH

Specifications taken from the product datasheet. The datasheet is the binding document. Ask us if anything is unclear for your installation.

About the product

  • Pure optical path
  • Transparent to data speed
  • Protocol independent
  • Manual or remote control, uses software calls to webserver to operate switching
  • Management WebGUI, command and TTL-level
  • Cost efficient
  • Future proof
  • Redundant power supply (AC and/or DC) (optional)
  • HTTPS/SSL support

Applications

What it is used for

Applications →
  1. Secure & isolated linksCopper carries interference, ground faults and eavesdropping risk along with the signal.

In the catalogue

Related products

Browse the full range

Standard

Fiber Optical Switch 1x4 MPO

Switching time
20 ms
Insertion loss, typical
<0.8 dB
Optical
Multimode 850/1300 nm

Product no 60-00-9183

Standard

Fiber Optical Switch 1x2

Switching time
3.5 ms
Insertion loss, typical
<0.3 dB
Optical channels in/out
2 LC duplex

2 configurations

Standard

Fiber Optical Switch 1x2 MPO

Switching time
3.5 ms
Insertion loss, typical
<0.3 dB
Optical channels in/out
2 LC

Product no 60-00-8258

Hands soldering a circuit board under a work lamp

Next step

Ready for a concrete proposal?

Request a quote for this product. Certification papers and procurement documentation are available on request. Our engineers in Stockholm respond directly.

Verified credentials

All certifications