Standard
Data Diode Secure 100 Mbit MM
- Data rate
- 100 Mbps
- Wavelength
- Multimode 1310 nm
Product no 60-00-7304
Public sector
Medical technology
Galvanic isolation is a double argument here: security, and fiber neither picking up nor radiating interference near diagnostic equipment.
- Area
- Data diodes
- Architecture patterns
- 1
- Products used
- 3
The problem
What makes it hard
Measurements and image data have to leave a medical technology network whose equipment cannot be updated without recertification, and reach records and analysis systems.
The requirement that the protected domain stay unchanged — the equipment must not be patched — makes compensating controls the whole strategy rather than a complement to patching.
How it is built
OT export out, control or updates in
Two links in opposite directions, each with its own approval and its own decision owner.
See the full pattern- One-way path
- Data path
In the catalogue
Equipment from the catalogue
Built from: Data Diode Secure 100 Mbit MM 60-00-7304, Data Diode Secure 100 Mbit SM 60-00-8363 and Data Diode Secure 1 Gbit SM 60-00-8362.
Standard
Data Diode Secure 100 Mbit SM
- Data rate
- 100 Mbps
- Wavelength
- Singlemode 1310 nm
Product no 60-00-8363
Standard
Data Diode Secure 1 Gbit SM
- Data rate
- 1 Gbps
- Wavelength
- Singlemode 1310 nm
- Input, LC
- 1000 BaseLX
Product no 60-00-8362
Reading and references
Explained in
Named customer references are not published. What we can show is the solution area this environment belongs to, and the reasoning behind the design.
Environments
Environments with the same problem
The technology is the same; the buying process usually is not.
- Patch distribution into a closed networkThe direction runs towards the protected side, which inverts every assumption the other flows rest on.
- SCADA export to the office networkThe direction that matters is out. Everything that wants to come back in is a separate decision with its own owner.
- Log export to a SOCThe one flow where the diode is cheaper and simpler than the alternative — which is why it is almost always the right first installation.
- Switching station with SCADA releaseMeasurements must leave the station without opening a way back in.
Next step
Describe your environment
If yours is close to this one but not the same, that difference is usually where the design decisions are. Tell us what it looks like.
Verified credentials
All certifications- Swedish Armed ForcesM-numbered equipmentMain supplier, Total Defence
- Government of SwedenSupplier to Swedish authoritiesPolice · FMV · FOI
- NATOCertified TEMPEST supplierSDIP-27 · Level A & B
- ISO 9001 14001ISO certifiedQuality & environmentDownload certificate (JPG)
- SOFFDefence industry memberExport control frameworks
- Made in SwedenDesigned & built in StockholmSecure supply chain
